network-ups-tools: update to 2.8.5

[slymattz]

Testing the changes

• I tested the changes in this PR: YES

$ upsc eaton3s
battery.charge: 100
battery.charge.low: 20
battery.runtime: 2592
battery.type: PbAc
device.mfr: EATON
device.model: Eaton 3S 700
device.serial: Blank
device.type: ups
device.usb.version: USB
driver.debug: 0
driver.flag.allow_killpower: 0
driver.name: usbhid-ups
driver.parameter.interrupt_pipe_no_events_tolerance: -1
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: auto
driver.state: updateinfo
driver.version: 2.8.5
driver.version.data: MGE HID 1.58
driver.version.internal: 0.71
driver.version.usb: libusb-1.0.29 (API: 0x0100010B)
input.transfer.high: 264
input.transfer.low: 184
outlet.1.desc: PowerShare Outlet 1
outlet.1.id: 1
outlet.1.protect.status: not protected
outlet.1.status: on
outlet.1.switchable: no
outlet.desc: Main Outlet
outlet.id: 0
outlet.switchable: yes
output.frequency.nominal: 50
output.voltage: 230.0
output.voltage.nominal: 230
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.firmware: 02.08.0010
ups.load: 9
ups.mfr: EATON
ups.model: Eaton 3S 700
ups.power.nominal: 700
ups.productid: ffff
ups.realpower: 50
ups.serial: Blank
ups.status: OL
ups.timer.shutdown: -1
ups.timer.start: -1
ups.type: offline / line interactive
ups.vendorid: 0463

$ doas upsmon -c fsd
Network UPS Tools upsmon 2.8.5 release
Exiting upsmon instance after sending a signal to the running daemon successfully

Broadcast message from nut@void-SN700 (somewhere) (Wed Apr  8 20:21:55 2026):                                                                                                                                                                                                                                        08/04  20:21:54

Executing automatic power-fail shutdown



Broadcast message from nut@void-SN700 (somewhere) (Wed Apr  8 20:21:55 2026):

Auto logout and shutdown proceeding

Connection to nas closed by remote host.
Connection to nas closed.

Local build testing

• I built this PR locally for my native architecture: x86_64-glibc
• I built this PR locally for these architectures: x86_64-musl