An FPGA-based USB 1.1 (full-speed) device core to implement USB-serial, USB-camera, USB-audio, USB-hid, etc. It requires only 3 FPGA common IOs rather than additional chips. 基于FPGA的USB 1.1 (full-speed) device端控制器，可实现USB串口、USB摄像头、USB音频、U盘、USB键盘等设备，只需要3个FPGA普通IO，而不需要额外的接口芯片。

Hacking tool inside a Raspberry Pi zero

AlienFX is a CLI and GUI utility to control the lighting effects of your Alienware computer.

Firmware dumper and various utilities for ASMedia USB Controllers and related firmware

Raspberry Pi impersonates Nintendo Switch controller

Nintendo Switch Gamepad Arduino Library For ESP32S3 and ESP32S2

Automatically launch/close Steam big picture mode when a controller is connected or disconnected on linux.

👀 Setup an Oculus Rift on a Windows 10 VM made with KVM

Nintendo Switch Gamepad Arduino Library Using TinyUSB

Nintendo Switch One Hand Controller

Arduino USB flight joystick for ESP32S3 and ESP32S2

USB Gamepad for ESP32

A Python module for controlling PTZ cameras running on Sony VISCA protocol via serial USB

Light's Thrill is an USB HID controller for RGB LED strips compatible with Corsair iCUE application.

USB Flight Joystick Arduino Library Using Adafruit TinyUSB XAC compatible

Hardware controller for moOde Audio using USB numpad

Implementation of a USB arcade spinner to be used, for example, in Arkanoid gameplay

OpenDeck-RP2040-v0 is a DIY 9-key macro pad prototype inspired by the Elgato Stream Deck, built around the Seeed XIAO RP2040.

🔧 Streamline code analysis, TypeScript checks, and background task automation for pi with powerful, secure development tools and integrations.