We are trying to develop the driver for the Mediatek mt7902 wifi 6E chip
Firmwares are stored in mt7902_firmware folder.
Recently released firmware are in the mt7902_firmware/latest folder.
Clone the repository to your local pc
git clone https://github.com/OnlineLearningTutorials/mt7902_temp
If you don't want to clone past history than
git clone --depth 1 https://github.com/OnlineLearningTutorials/mt7902_temp
Warning
If bluetooth driver conflict with gen4-mt7902 than please remove the bluetooth firmware so that it not interfere with this driver
sudo rm /lib/firmware/mediatek/mt7902/BT_RAM_CODE_MT7902_1_1_hdr.bin.zst
This project uses the firmware
/lib/firmware/mediatek/BT_RAM_CODE_MT7902_1_1_hdr.bin.zst
To enable bluetooth go to the directory of your current kernel version. ``
Like if you have kernel linux-6.16 than go to the directory ./linux-6.16/drivers/bluetooth .
Open terminal in this directory and compile with command `make`.
Two kernel modules are compiled `btusb.ko` and `btmtk.ko`.
To enable bluetooth in your device remove the btusb and btmtk in your system and install these two files, use commands
sudo rmmod btusb
sudo rmmod btmtk
sudo insmod btmtk.ko
sudo insmod btusb.ko
Now check your bluetooth is working now.
Important
A working repo with some limitation is here
WiFi driver for the mt7902, recently released by mediatek is inside the latest folder.
If you are using Ubuntu than just go to the latest folder and run the following command in the termianl.
make
It will compile all modules, compress it and install it (replace original kernel module with the modified module). If you are some other distro or not want all steps and only wants to compile the code, than run in the termianl
make module_compile
To compress the module you compiled, than run in terminal
make module_compress
To install the compressed module to the system's kernel module, run in terminal
make module_install
