diff --git a/docs/panel-functions.md b/docs/panel-functions.md
index 1b225a1..256c113 100644
--- a/docs/panel-functions.md
+++ b/docs/panel-functions.md
@@ -115,3 +115,9 @@ To control a device individually press the device name.
 
 All the capabilities of the chosen light will be shown on this page. If the light is RGB capable there will be an icon
 in the top right corner to toggle between Color Temperature mode and Color mode.
+
+### Thermostat control page
+
+All the capabilities of the chosen thermostat/climate entity will be shown on this page. Simple press the setting you want to change and use the arrows to change it.
+Wait for the timeout or press the next option to apply the changes. The current temperature for the room will be shown using the temperature sensor attached to the room if one exists.
+If no such sensor is attached to the room the thermostat is placed in the current temperature reading will be read from the internal thermistor.
diff --git a/docs/web-interface.md b/docs/web-interface.md
index 5a6f177..c8e9592 100644
--- a/docs/web-interface.md
+++ b/docs/web-interface.md
@@ -66,8 +66,7 @@ Available options for each individual NSPanel are:
   All actions meant for relay 1 will be applied to relay 2 and vice versa.
 - **Left/Right Button mode** - Change the mode of a button. Available options are:
   - **Direct mode** - The buttons controls the relay directly. No WiFi is needed.
-  - **Detached mode** - Detached mode controls a light via your selected home automation platform.
-    This also exposes the option "Left/Right button controls light in room" as well as "Left/Right button controls light" where you select which entity it controls.
+  - **Detached mode** - Detached mode controls an entity via your selected home automation platform. Do not however that not all entity types support the toggle mechanism.
   - **Custom MQTT** - This mode can be used to send a custom message on a custom MQTT topic.
   - **Follow mode** - When the button is pressed the relay is engaged, when the button is release the relay is disconnected.
 - **Relay 1/2 default mode** - Select the default mode of the relay when the NSPanel starts.
@@ -154,7 +153,7 @@ In the last step you can configure settings such as display name and any setting
 When adding/editing a light entity you get multiple options of charecteristics of the light.
 
 - **Name** - The displayed name on the NSPanel and web interface.
-- **Home Assistant Entity <Label value="home_assistant"/>** - The displayed name on the NSPanel and web interface.
+- **Home Assistant Entity <Label value="home_assistant"/>** - The home assistant entity to control.
 - **Type** - is this light a ceiling or table light (as to how it should be grouped/displayed on main page on NSPanel).
 - **Control mode** - Is this light dimmable or it it simply an on/off light.
 - **Controlled by main page** - If this is marked the light will be included in the displayed data and controlled from the main page of the NSPanel.
@@ -186,7 +185,34 @@ When adding/editing a Home Assistant button entity you simply get the choice of
 
 <CenteredImage src="/images/doc/configure_home_assistant_button.png" alt="Add/Edit button Home Assistant" figureNumber="14" />
 
-#### Configure NSPM buttons
+#### Configure thermostat/climate control <Label value="beta"/>
+
+When adding/editing a thermostat/climate entity you get multiple options of characteristics of the entity.
+
+- **Name** - The displayed name on the NSPanel and web interface.
+- **Home Assistant Entity <Label value="home_assistant"/>** - The home assistant entity to control.
+- **Load options from selected Home Assistant entity <Label value="home_assistant"/>** - This button will load all available options from the selected Home Assistant entity and populate the fields below.
+- **Temperature item <Label value="openhab"/>** - The item in OpenHAB that controls the target temperature.
+- **Step size <Label value="openhab"/>** - When adjusting the temperature, step the temperature by this value.
+
+Following those settings there will be groups of items/settings to adjust. These are the following:
+
+- Fan mode
+- Mode
+- Presets
+- Swing
+- Horizontal swing
+
+Each of these groups have, in case of running <Label value="openhab"/>, a field for selecting the OpenHAB item that controls it.
+There is also a table of settings for each group. This table is built so that the user may choose a different display name and
+icon for each value. The left most field is the value that will be sent to Home Assistant or OpenHAB, the next field is the
+display name that will be shown on the NSPanel, and the rightmost field is the icon that will be shown on the NSPanel. To change the icon
+press the button and select the icon from the list.
+
+<CenteredImage src="/images/doc/configure_home_assistant_thermostat.png" alt="Add/Edit thermostat Home Assistant" figureNumber="12a" />
+<CenteredImage src="/images/doc/configure_openhab_thermostat.png" alt="Add/Edit thermostat OpenHAB" figureNumber="12b" />
+
+#### Configure NSPM (MQTT) buttons
 
 An NSPM button entity is controlled by the NSPanel Manager itself. This button entity is simply used to send an MQTT payload to a specified topic. What you do with it is up to you.
 
diff --git a/static/images/doc/configure_home_assistant_thermostat.png b/static/images/doc/configure_home_assistant_thermostat.png
new file mode 100644
index 0000000..15a5f0f
Binary files /dev/null and b/static/images/doc/configure_home_assistant_thermostat.png differ
diff --git a/static/images/doc/configure_openhab_thermostat.png b/static/images/doc/configure_openhab_thermostat.png
new file mode 100644
index 0000000..29f3392
Binary files /dev/null and b/static/images/doc/configure_openhab_thermostat.png differ